Linux磁盘分区,LINUX下奇异的脚本重编写

By admin in 澳门新葡亰官网app on 2019年9月3日

LINUX下奇怪的本子重编排,化解脚本无法试行

***********************************************声明**********************************************

原创小说,出自 “桃红的blog”
博客,招待转发,转发时请必须申明出处,否则追究版权法律义务。

发挥有不当之处,请你留言或邮件([email protected])指明,不胜感谢。

本文转发必得保留此处:

深蓝的blog:

***************************************************************************************************

前几日,在安装oracle数据库的长河中,在进行安装包脚本时,报出相比较奇异的失完毕象,如下所示:

[[email protected] test]# sh rpm.sh
--单词释义
--ambiguous:模糊不清的
--redirect:直接的
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: command not found
: command not found
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: ambiguous redirect
: command not found
: command not found
: command not found 

于是乎,查看了施行的脚本,此脚本是在WIN平台下提前编写好的举办安装包的下令,如下所示:

[[email protected] test]# cat rpm.sh     
--查看有问题的脚本,没有发现异常编写
rpm -ivh binutils-2.17.50.0.6-14.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh binutils-devel-2.17.50.0.6-14.el5.i386.rpm >> rpm.log 2>&1 
rpm -ivh binutils-devel-2.17.50.0.6-14.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh compat-db-4.2.52-5.1.i386.rpm >> rpm.log 2>&1
rpm -ivh compat-db-4.2.52-5.1.x86_64.rpm >> rpm.log 2>&1
rpm -ivh control-center-2.16.0-16.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh control-center-2.16.0-16.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh control-center-devel-2.16.0-16.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh control-center-devel-2.16.0-16.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh gcc-4.1.2-50.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh gcc-c++-4.1.2-50.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-2.5-58.i686.rpm >> rpm.log 2>&1
rpm -ivh glibc-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-common-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-devel-2.5-58.i386.rpm >> rpm.log 2>&1
rpm -ivh glibc-devel-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-headers-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-utils-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libstdc++-devel-4.1.2-50.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libstdc++-devel-4.1.2-50.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libX11-1.0.3-11.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libX11-1.0.3-11.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libX11-devel-1.0.3-11.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libX11-devel-1.0.3-11.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libXp-1.0.0-8.1.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libXp-1.0.0-8.1.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libXp-devel-1.0.0-8.1.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libXp-devel-1.0.0-8.1.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libXpm-3.5.5-3.i386.rpm >> rpm.log 2>&1
rpm -ivh libXpm-3.5.5-3.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libXpm-devel-3.5.5-3.i386.rpm >> rpm.log 2>&1
rpm -ivh libXpm-devel-3.5.5-3.x86_64.rpm >> rpm.log 2>&1
rpm -ivh make-3.81-3.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh pdksh-5.2.14-36.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh sysstat-7.0.2-3.el5_5.1.x86_64.rpm >> rpm.log 2>&1

rm -rf binutils-2.17.50.0.6-14.el5.x86_64.rpm
rm -rf binutils-devel-2.17.50.0.6-14.el5.i386.rpm
rm -rf binutils-devel-2.17.50.0.6-14.el5.x86_64.rpm
rm -rf compat-db-4.2.52-5.1.i386.rpm
rm -rf compat-db-4.2.52-5.1.x86_64.rpm
rm -rf control-center-2.16.0-16.el5.i386.rpm
rm -rf control-center-2.16.0-16.el5.x86_64.rpm
rm -rf control-center-devel-2.16.0-16.el5.i386.rpm
rm -rf control-center-devel-2.16.0-16.el5.x86_64.rpm
rm -rf gcc-4.1.2-50.el5.x86_64.rpm
rm -rf gcc-c++-4.1.2-50.el5.x86_64.rpm
rm -rf glibc-2.5-58.i686.rpm
rm -rf glibc-2.5-58.x86_64.rpm
rm -rf glibc-common-2.5-58.x86_64.rpm
rm -rf glibc-devel-2.5-58.i386.rpm
rm -rf glibc-devel-2.5-58.x86_64.rpm
rm -rf glibc-headers-2.5-58.x86_64.rpm
rm -rf glibc-utils-2.5-58.x86_64.rpm
rm -rf libstdc++-devel-4.1.2-50.el5.i386.rpm
rm -rf libstdc++-devel-4.1.2-50.el5.x86_64.rpm
rm -rf libX11-1.0.3-11.el5.i386.rpm
rm -rf libX11-1.0.3-11.el5.x86_64.rpm
rm -rf libX11-devel-1.0.3-11.el5.i386.rpm
rm -rf libX11-devel-1.0.3-11.el5.x86_64.rpm
rm -rf libXp-1.0.0-8.1.el5.i386.rpm
rm -rf libXp-1.0.0-8.1.el5.x86_64.rpm
rm -rf libXp-devel-1.0.0-8.1.el5.i386.rpm
rm -rf libXp-devel-1.0.0-8.1.el5.x86_64.rpm
rm -rf libXpm-3.5.5-3.i386.rpm
rm -rf libXpm-3.5.5-3.x86_64.rpm
rm -rf libXpm-devel-3.5.5-3.i386.rpm
rm -rf libXpm-devel-3.5.5-3.x86_64.rpm
rm -rf make-3.81-3.el5.x86_64.rpm
rm -rf pdksh-5.2.14-36.el5.x86_64.rpm
rm -rf sysstat-7.0.2-3.el5_5.1.x86_64.rpm

rpm -qa|grep binutils >> queryrpm.log 2>&1
rpm -qa|grep compat >> queryrpm.log 2>&1
rpm -qa|grep control >> queryrpm.log 2>&1
rpm -qa|grep gcc >> queryrpm.log 2>&1
rpm -qa|grep glibc >> queryrpm.log 2>&1
rpm -qa|grep gnome >> queryrpm.log 2>&1
rpm -qa|grep libstdc++ >> queryrpm.log 2>&1
rpm -qa|grep make >> queryrpm.log 2>&1
rpm -qa|grep pdksh >> queryrpm.log 2>&1
rpm -qa|grep sysstat >> queryrpm.log 2>&1 

接下去接纳的法子是,把该脚本中的内容在LINUX平台下再次拷贝到新建的文件中,如下所示:

[[email protected] test]# cat hyll.sh
--LINUX系统下,把rpm.sh中的指令复制了一遍到新的脚本文件hyll.sh中
--重新执行脚本内容如下,与之前rpm.sh脚本内容完全一样
rpm -ivh binutils-2.17.50.0.6-14.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh binutils-devel-2.17.50.0.6-14.el5.i386.rpm >> rpm.log 2>&1 
rpm -ivh binutils-devel-2.17.50.0.6-14.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh compat-db-4.2.52-5.1.i386.rpm >> rpm.log 2>&1
rpm -ivh compat-db-4.2.52-5.1.x86_64.rpm >> rpm.log 2>&1
rpm -ivh control-center-2.16.0-16.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh control-center-2.16.0-16.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh control-center-devel-2.16.0-16.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh control-center-devel-2.16.0-16.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh gcc-4.1.2-50.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh gcc-c++-4.1.2-50.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-2.5-58.i686.rpm >> rpm.log 2>&1
rpm -ivh glibc-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-common-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-devel-2.5-58.i386.rpm >> rpm.log 2>&1
rpm -ivh glibc-devel-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-headers-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh glibc-utils-2.5-58.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libstdc++-devel-4.1.2-50.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libstdc++-devel-4.1.2-50.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libX11-1.0.3-11.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libX11-1.0.3-11.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libX11-devel-1.0.3-11.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libX11-devel-1.0.3-11.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libXp-1.0.0-8.1.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libXp-1.0.0-8.1.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libXp-devel-1.0.0-8.1.el5.i386.rpm >> rpm.log 2>&1
rpm -ivh libXp-devel-1.0.0-8.1.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libXpm-3.5.5-3.i386.rpm >> rpm.log 2>&1
rpm -ivh libXpm-3.5.5-3.x86_64.rpm >> rpm.log 2>&1
rpm -ivh libXpm-devel-3.5.5-3.i386.rpm >> rpm.log 2>&1
rpm -ivh libXpm-devel-3.5.5-3.x86_64.rpm >> rpm.log 2>&1
rpm -ivh make-3.81-3.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh pdksh-5.2.14-36.el5.x86_64.rpm >> rpm.log 2>&1
rpm -ivh sysstat-7.0.2-3.el5_5.1.x86_64.rpm >> rpm.log 2>&1

rm -rf binutils-2.17.50.0.6-14.el5.x86_64.rpm
rm -rf binutils-devel-2.17.50.0.6-14.el5.i386.rpm
rm -rf binutils-devel-2.17.50.0.6-14.el5.x86_64.rpm
rm -rf compat-db-4.2.52-5.1.i386.rpm
rm -rf compat-db-4.2.52-5.1.x86_64.rpm
rm -rf control-center-2.16.0-16.el5.i386.rpm
rm -rf control-center-2.16.0-16.el5.x86_64.rpm
rm -rf control-center-devel-2.16.0-16.el5.i386.rpm
rm -rf control-center-devel-2.16.0-16.el5.x86_64.rpm
rm -rf gcc-4.1.2-50.el5.x86_64.rpm
rm -rf gcc-c++-4.1.2-50.el5.x86_64.rpm
rm -rf glibc-2.5-58.i686.rpm
rm -rf glibc-2.5-58.x86_64.rpm
rm -rf glibc-common-2.5-58.x86_64.rpm
rm -rf glibc-devel-2.5-58.i386.rpm
rm -rf glibc-devel-2.5-58.x86_64.rpm
rm -rf glibc-headers-2.5-58.x86_64.rpm
rm -rf glibc-utils-2.5-58.x86_64.rpm
rm -rf libstdc++-devel-4.1.2-50.el5.i386.rpm
rm -rf libstdc++-devel-4.1.2-50.el5.x86_64.rpm
rm -rf libX11-1.0.3-11.el5.i386.rpm
rm -rf libX11-1.0.3-11.el5.x86_64.rpm
rm -rf libX11-devel-1.0.3-11.el5.i386.rpm
rm -rf libX11-devel-1.0.3-11.el5.x86_64.rpm
rm -rf libXp-1.0.0-8.1.el5.i386.rpm
rm -rf libXp-1.0.0-8.1.el5.x86_64.rpm
rm -rf libXp-devel-1.0.0-8.1.el5.i386.rpm
rm -rf libXp-devel-1.0.0-8.1.el5.x86_64.rpm
rm -rf libXpm-3.5.5-3.i386.rpm
rm -rf libXpm-3.5.5-3.x86_64.rpm
rm -rf libXpm-devel-3.5.5-3.i386.rpm
rm -rf libXpm-devel-3.5.5-3.x86_64.rpm
rm -rf make-3.81-3.el5.x86_64.rpm
rm -rf pdksh-5.2.14-36.el5.x86_64.rpm
rm -rf sysstat-7.0.2-3.el5_5.1.x86_64.rpm

rpm -qa|grep binutils >> queryrpm.log 2>&1
rpm -qa|grep compat >> queryrpm.log 2>&1
rpm -qa|grep control >> queryrpm.log 2>&1
rpm -qa|grep gcc >> queryrpm.log 2>&1
rpm -qa|grep glibc >> queryrpm.log 2>&1
rpm -qa|grep gnome >> queryrpm.log 2>&1
rpm -qa|grep libstdc++ >> queryrpm.log 2>&1
rpm -qa|grep make >> queryrpm.log 2>&1
rpm -qa|grep pdksh >> queryrpm.log 2>&1
rpm -qa|grep sysstat >> queryrpm.log 2>&1
[[email protected] test]# sh  hyll.sh 

马到功成实行,相比前后多个剧本,书写内容上尚未差距。

翻看脚本权限,完全平等的五个剧本,hyll.sh能够健康施行,而rpm.sh却无法符合规律实施。

[[email protected] test]# ls -ll
total 24
-rw-r--r-- 1 root root 3855 Sep 17 15:23 hyll.sh
-rw-r--r-- 1 1 root root 3942 Sep 17 14:32 rpm.sh 

小结:

今天遇见的难题深感某个奇葩,差相当的少一样的七个剧本,八个足以试行,二个却不得以试行。早先时期又尝试了一遍,将脚本完全同样的复制了三遍(脚本名称、内容),没做别的修改,便是把剧本重新建立了一回。重新创建后的本子却足以进行了。想了下,独一的区分正是心余力绌实施的台本实在WINDOWS上编写制定的,新的脚本实在LINUX上编写制定的。难题尽管缓和,这些地方依然深感格外古怪。

于是带着惊愕,在互连网搜了下“ambiguous
redirect”的报错原因,开掘众多有关于重定向符格式的题材。于是想了下,是还是不是是重定向符号是急需在LINUX下编写制定才会平常执行(也正是说LINUX系统对少数特殊操作符比较灵敏)。

带着难点,开端重新三次实行。大概思路如下:

在LINUX下将不得实施脚本修改为可实施的剧本(就是在LINUX下重写贴三遍指令),导出到WINDOWS下,重新换LINUX平台,将导出的脚本文件重命名,上传到实验平台,验证脚本的可用性。经过验证后开掘,通过LINUX平台编辑的剧本均可以符合规律施行,脚本异常的小概执行是出于跨平台书写格式所导致的。在WINDOWS和LINUX系统下里面临换行等格式都是有细微差其余,由此,前几天这一个报错告诉我们,以往涂改脚本要在LINUX系统下成功,完毕后再导入到自个儿的存款和储蓄设备中,避防万一。

***********************************************声明**********************************************

原创小说,出自 “灰褐的blog”
博客,迎接转发,转发时请必须申明出处,不然追究版权法律义务。

公布有不当之处,请您留言或邮件([email protected])指明,不胜谢谢。

正文转发必需保留此处:

深蓝的blog:

***************************************************************************************************

***********************************************声明**********************************************
原创小说,出自…

简要介绍LINUX远程联机软件:PUTTY、SecureCRT、X-Manager

***********************************************声明************************************************

原创文章,出自 “朱红的blog”
博客,迎接转发,转发时请必须注脚出处(

发布有荒唐之处,请您留言或邮件([email protected])指明,不胜谢谢。

*****************************************************************************************************

本文对长途访谈Linux系统时,最常使用的七款远程联机软件做一遍简介:

Linux磁盘分区(二):删除

***********************************************声明************************************************

原创小说,出自 “深蓝色的blog”
博客,接待转载,转载时请必须注解出处(

公布有荒唐之处,请您留言或邮件([email protected])指明,不胜多谢。

*****************************************************************************************************

续接上篇:“比如:将sdb1格式化为ext3文件系统”点击张开链接

*****************************************************************************************************
Linux硬盘分区(二):删除

*****************************************************************************************************

*************************
举例:对sdb1进行umount

*************************

[[email protected] /]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/sda1             9.7G  5.4G  3.9G  59% /
/dev/sda3              35G   17G   17G  50% /home
tmpfs                1006M     0 1006M   0% /dev/shm
/dev/sdb1             1.9G   35M  1.8G   2% /data1
[[email protected] /]# umount /data1
[[email protected] /]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/sda1             9.7G  5.4G  3.9G  59% /
/dev/sda3              35G   17G   17G  50% /home
tmpfs                1006M     0 1006M   0% /dev/shm

[[email protected] /]# fdisk -l

Disk /dev/sda: 53.6 GB, 53687091200 bytes
255 heads, 63 sectors/track, 6527 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        1305    10482381   83  Linux
/dev/sda2            1306        1827     4192965   82  Linux swap / Solaris
/dev/sda3            1828        6527    37752750   83  Linux

Disk /dev/sdb: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1         250     2008093+  83  Linux
/dev/sdb2             251         500     2008125   83  Linux
/dev/sdb3             501         750     2008125   83  Linux
/dev/sdb4             751        1305     4458037+   5  Extended
/dev/sdb5             751         875     1004031   83  Linux
/dev/sdb6             876        1000     1004031   83  Linux
/dev/sdb7            1001        1305     2449881   83  Linux

*************************
对第二块磁盘操作(即/dev/sdb)
*************************

[[email protected] /]# fdisk /dev/sdb

The number of cylinders for this disk is set to 1305.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): m
Command action
   a   toggle a bootable flag
   b   edit bsd disklabel
   c   toggle the dos compatibility flag
   d   delete a partition
   l   list known partition types
   m   print this menu
   n   add a new partition
   o   create a new empty DOS partition table
   p   print the partition table
   q   quit without saving changes
   s   create a new empty Sun disklabel
   t   change a partition's system id
   u   change display/entry units
   v   verify the partition table
   w   write table to disk and exit
   x   extra functionality (experts only)

Command (m for help): p

Disk /dev/sdb: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1         250     2008093+  83  Linux
/dev/sdb2             251         500     2008125   83  Linux
/dev/sdb3             501         750     2008125   83  Linux
/dev/sdb4             751        1305     4458037+   5  Extended
/dev/sdb5             751         875     1004031   83  Linux
/dev/sdb6             876        1000     1004031   83  Linux
/dev/sdb7            1001        1305     2449881   83  Linux

*************************
去除分区:sdb1及其它
************************* 

Command (m for help): d
--输入删除指令
Partition number (1-7): 1
--输入删除的分区号
Command (m for help): p
--打印分区表
Disk /dev/sdb: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb2             251         500     2008125   83  Linux
/dev/sdb3             501         750     2008125   83  Linux
/dev/sdb4             751        1305     4458037+   5  Extended
/dev/sdb5             751         875     1004031   83  Linux
/dev/sdb6             876        1000     1004031   83  Linux
/dev/sdb7            1001        1305     2449881   83  Linux
--可以看到sdb1已经被删除了
--接下来同理,删除其它分区
Command (m for help): d
Partition number (1-7): 2

Command (m for help): d
Partition number (1-7): 3

Command (m for help): d
Partition number (1-7): 4

Command (m for help): p 

Disk /dev/sdb: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System

Command (m for help): w
--保存退出
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.

--现在可以移除磁盘了

***********************************************声明************************************************

原创小说,出自 “莲红的blog”
博客,迎接转载,转发时请必须评释出处(

发挥有错误之处,请你留言或邮件([email protected])指明,不胜感谢。

*****************************************************************************************************

***********************************************声明************************************************
原创小说,出自 豆沙色的blog 博客,…

一、PUTTY

先是介绍一款非常精美但在实际事业中央银行使频繁的软件,那正是PUTTY,之所以最初介绍,因为,那款软件应用极其之轻松,俨然是无须介绍,就能够使用。

澳门新葡亰官网app 1

采取表达,简要介绍图例:

澳门新葡亰官网app 2

联网后如下所示:

澳门新葡亰官网app 3

二、SecureCRT

澳门新葡亰官网app 4

澳门新葡亰官网app 5

澳门新葡亰官网app 6

澳门新葡亰官网app 7

澳门新葡亰官网app 8

澳门新葡亰官网app 9

澳门新葡亰官网app 10

澳门新葡亰官网app 11

三、X-Manager

澳门新葡亰官网app 12

澳门新葡亰官网app 13

澳门新葡亰官网app 14

澳门新葡亰官网app 15

澳门新葡亰官网app 16

澳门新葡亰官网app 17

澳门新葡亰官网app 18

澳门新葡亰官网app,由来,简单的牵线了什么运用联机软件来登陆LINUX系统。

***********************************************声明************************************************

原创文章,出自 “深黑的blog”
博客,款待转发,转发时请必需评释出处(

发挥有错误之处,请您留言或邮件([email protected])指明,不胜多谢。

*****************************************************************************************************

***********************************************声明************************************************
原创文章,出…

发表评论

电子邮件地址不会被公开。 必填项已用*标注

网站地图xml地图
Copyright @ 2010-2019 澳门新葡亰官网app 版权所有